Product Description:
Seaclean Plus is a modern low-toxic, biodegradable solvent based product. This product is excellent as a tank cleaner and degreaser.

Properties: - Odour: Hydrocarbon odour
- Appearance: Liquid, pale amber, dispersible in water
- pH - not applicable
- Boiling point 187 °C to 211 °C at 760 mm /Hg
- Vapour pressure - not known
- Vapour density (air = 1) >1
- Freezing point unknown
- Emulsifies in water
- Specific gravity (water=1) 0.81
- Flash point 66 deg C (CC) , Lower flammability limit 0.7%(in air), Upper flammability limit 6%(in air)
- Auto-ignition point 225 deg C at 760 mm Hg
- Lower explosive limit 0.7 % (in air)

Features:
The emulsifying agents in this product are biodegradable
Does not contain nonylphenol ethoxylates or other estrogenic compounds
Versatile, can be used for a wide range of applications
Can be used for cleaning and gas-freeing of double bottom, deep, and fuel oil tanks at sea
Can also be used for cleaning and gas-freeing of crude and refined mineral oil cargo tanks
Can be used for degreasing and cleaning of bilge spaces and engine rooms

Benefits :
Highly concentrated tank cleaner with quick penetration and powerful emulsifying properties
Easy rinse off, leaving clean and oil-free surfaces
Economical, very low dosage rates
Easy to use by any conventional means
Safe to use on most metal surfaces, painted surfaces and tank coatings

Directions for use, Dosing method: Direct injection method - for tank cleaning machines The dose rate should be between 0.1-0.2% i.e.1-2 litres per ton wash water.
Recirculation method - for tank cleaning machines It is advised to use a solution of 0.1-0.2% i.e. 1-2 litres per ton wash water mixed in the tank to be cleaned.
Dose rates and results will vary depending on contamination, the temperature of the cleaning solution, and number of tanks to be cleaned with the solution. Best results are obtained when water is heated to a temperature between 65-80°C.

Packaging: 1Ltr, 5ltrs, 10 ltrs